With your TBI Conversion Kit you will receive:

• Step by Step checklist to download

• access to download a side draft carb specific manual here

• complete walk through of Bob Danielson’s installation

• AFI’s Instruction Manual with a trouble shooting guide. These are Generic instructions and not specific to this conversion but they do have very good troubleshooting tips.

• A Tutorial on Accessing and Understanding ECM Trouble Codes.

If you look real close, you might be able to see that these Zenith Stromberg 175CD carbs have the TBI adapters and Throttle Position Sensor already installed. As you can see, it’s very easy to maintain an “original” look. The six links above will take you on a step by step tour of how easy this conversion really is.